BRUHL DRYER OFFERS Click here

R1300GS accessories. click here

R12 and R12 nine T accessories click here

F900GS, Adventure and F800GS accessories. click here

Choose your Bike...

...Or pick a department

Nippy Normans R1300GS USB and USB-C upgrade kit

£59.90

Part No: GZM-UBPS-KIT-R1300GS

No-one has reviewed this item yet. Be the first!

In stock

Sorry, this item out of stock. However, if you would like us to email you when this comes back into stock, enter your email address below.


Sorry, this item is out of stock.

Sorry, this item is temporarily unavailable.

See product text for delivery date.

DUE END NOVEMBER.

More power where you need and a convenient place for the DIN socket to suit battery charging.

THE PROBLEM

The R1300GS motorcycle is shipped from the factory with a DIN socket on the right side
of the TFT display and a USB socket inside the storage cupboard on top of the fuel tank.
This original single charging port isn't convenient for riders wanting to charge their smartphones
mounted outside the storage cupboard while on the move as it is not possible to close the lid due
to the cable. Plus the output of the BMW cupboard USB socket is very low.

HERE IS THE SOLUTION

1.The DIN socket on the right side of the TFT display is replaced with our state-of-the-art FAST CHARGE dual socket charger featuring USB-A and USB-C sockets. (The original BMW USB socket in the cupboard is single USB-A and NOT fast charge)

2.The BMW OE DIN socket is then installed below the bikes seat providing a neat solution for the common use of this socket such as charging/maintaining the Lithium battery or when using heated vests and other accessories.

Kit features:

• Plug and Play replacement of the original DIN socket with dual USB-A and USB-C sockets. Relocation of the BMW DIN socket to a more convenient location by the rear wheel.
• Relocation of the BMW DIN socket to a more convenient location by the rear wheel - in a suitable position for battery charging/maintenance or for accessories like a heated vest.
• Very quick installation without special tools.
• Only live if the ignition is on.
• Detailed instructions are included.
• New dual socket is always waterproof - sockets when used or when the covers are closed are always waterproof.
• New dual socket features output overvoltage, overheating and short-circuit protection.
• New dual socket is fully Can Bus compatible.
• New dual socket features independent socket rubber covers.

Technical specifications:

Power:
USB-C: 5V?3A / 9V?3A / 12V?3A (36W max.)
USB-A: 4.5V?5A / 5V?4.5A / 5V?3A / 9V?3A / 12V?3A (36W max.)
USB-C + USB-A: 5V?4.8A (24W max.)

Fast charge protocols supported:
USB-C port only: USB PD3.0/PD2.0/PPS (for Apple fast charge shall use Apple Lightning to USB-C cable.
Both ports: Qualcomm Quick Charge QC4+/QC4/QC3.0/QC2.0, Samsung
AFC, Huawei FCP and SCP, MediaTek PE2.0/PE1.1, Spreadtrum SFCP, OPPO
VOOC.
Other: BC1.2, Apple 2.4A

To fit:

R1300GS