Based on long years of experience and customer feedback we developed this Dual USB socket for BMW motorcycles
All modern BMW bikes come equipped with a lighter like socket to power accessories. These sockets are named DIN sockets. However, most customers either do not use them, or, in the need for USB to charge their mobile phones, cameras, GPS or intercom,
choose adapters to plug into those sockets.
Until now all USB chargers for motorcycles come equipped with a cover, but how to protect them while on the move under rain or dust?
The Dual USB socket solves these problems with following unique features:
BMW Plug-and-Play: the unit is designed in a way to fit the
DIN socket installation physically and electrically. This
means an easy and practical way to replace the origin DIN
socket, by simply unplugging the connector from bike’s cable harness,
unscrew the nut and install the USB dual charger in the same place and
same connector. No soldering or costly specialized technician
intervention needed. The final result is a nice and seamless installation,
as in the picture to the right on a R1200GS LC
Weatherproof USB ports: when a USB plug is inserted it becomes isolated from
rain and dust, due to specially designed rubber membranes. One needs this type
of device to use on the move, and not to be protected only when closed!
Independent covers: The Dual USB socket features two covers for the USB ports. If only one is in
use the other is closed and protected. The covers are designed to be easily
removed and closed with gloves.
Product specifications:
-Input voltage: 10 to 40 V
-Output voltage (USB ports): 5 V +/- 5%
-Output overvoltage, overheating and short-circuit protection
-Fully Can Bus compatible
-Total 3.3 Amp output, with current limiters per port (master port 1: 2.3 A / Aux port 2: 1.0 A)
-Intelligent device recognition: detects if Apple (meets MFi standard) or Android (BC1.2).
-Independent port rubber covers
-Plug compatible with BMW motorcycle DIN socket installation
To fit:
F650 twin/700GS/800GS
F800GT
F800R (despite strange location of DIN socket - this product will fit)
F750GS/850GS/Adventure 2018 on (DOWNLOAD THE SPECIAL INSTRUCTIONS FOR YOUR BIKE - see tab above)
F900R/XR
R1200GS (2004 TO 2012)
R1200GS LC 2013 on
R1200GS LC 2017 on
R1250GS
R1200Adventure 2003 to 2013
R1200Adventure LC 2014 on
R1200Adventure LC 2018 on
R1250Adventure
R1200R LC (NOT SUITABLE DUE TO FRAME RAILS)
R1200RS LC (NOT SUITABLE DUE TO FRAME RAILS)
R1250R (NOT SUITABLE DUE TO FRAME RAILS)
R1250RS (NOT SUITABLE DUE TO FRAME RAILS)
R1200RT LC
R1250RT
R NINE T all versions and years
S1000XR (to 2019)
S1000XR (2020 on)
K1200S/1300S - not in place of existing position - you may need to find a different place
K1200GT/1300GT
K1600GT/GTL
K1600 Bagger
K1600 Grand America
R18
NOTE:
If you wish to still charge your battery through a DIN socket just add this product to your bike:
DIN size socket kit part number BAS-SD14
OR ADD this product:
DIN socket relocation kit GZM-UBPS-RK
