Wunderlich vario clutch lever (black) R1200GS LC, R1250GS, R1200 Adv LC, R1200RT LC 2014 on, R1250RT, R NINE T, K1600series and MORE

Vario Levers represent a revolution in ergonomics, functionality and safety. In addition to allowing adjustable reach, they are also adjustable in length. These levers allow precise adjustment to exactly suit the needs of the rider in various situations and additionally, really look great. Adjusted all the way in, the levers are about 1/2 inch closer to the grip however it actually feels like more because the shape of the lever is more parallel to the handlebar than the stock lever.
Particularly with the powerful Integral-ABS system, a shorter lever can offer more precise control with less effort. GS riders can additionally benefit from a short lever that will be less prone to breakage in the event of a spill.
With the “Vario Levers” it’s now possible to activate the clutch and brake with two or three fingers, without pinching the remaining finger(s). This allows the lever to be adjusted closer to the grip, safely. Length adjustment is quickly and easily carried out by loosening the set screw, setting the desired length and then tightening. Another unique feature of the ‘Vario Lever’ is the ability to easily adjust the reach by turning the adjuster with your index finger while riding. This is useful when dealing with a changing pressure point, when for example riding on the track or negotiating a technical mountain road. The adjustment wheel is easy to operate, even with thick winter gloves.
You need have no doubt about the structural integrity of these levers. Even fully extended, the lever can withstand a force of over 130 pounds (!) without incident. The modular design of these levers makes a wide array of colour combinations possible. This allows further individualization of your BMW to suit your personality. The levers are exquisitely machined of aluminium and anodized. All materials and processes used in manufacturing conform to aircraft standards and of course, these levers have been tested and approved by the strict German TÜV.
SOLD EACH

Fits:
R1200GS LC 2013 on
R1200GS LC 2017 on
R1250GS
R1200GS Adv LC 2014 on
R1200GS Adv LC 2018 on
R1200RT LC 2014 on
R1250RT 2019 on
R NINE T (2014 to 2016)
R1200R LC 2015 on
R1200RS LC 2015 on
R1250R 2019 on
R1250RS 019 on
K1600GT/GTL
K1600Bagger/GA

FITTING INSTRUCTIONS
1. Screw out the bolt (image A) and remove the original lever.
2. Carefully position the new Wunderlich lever into position. Secure with the clip provided.
Adjustment
The span between the lever and handlebars can be adjusted by using the four position adjuster.
The length of the lever can be adjusted by undoing the small Allen bolt.